A getaddrinfo thread calls getaddrinfo(3) inside rb_thread_prevent_fork,
but on glibc its thread exit takes the resolver configuration lock again
after the thread has released the fork lock. A fork that lands then
leaves the child with that lock held, and every later name lookup in the
child blocks forever. getnameinfo(3) attaches the same resolver state,
even for a name in /etc/hosts, and its thread ran outside
rb_thread_prevent_fork altogether.
Make the lookup threads joinable and have fork join any that may still
be exiting. As a lookup thread finishes, still inside
rb_thread_prevent_fork, it swaps itself into a single slot with an
atomic exchange and joins the thread it displaced, which has usually
exited by then, and rb_thread_acquire_fork_lock joins whatever is left
in the slot. Once lookups settle, at most one finished thread is left
unjoined. The slot holds pthread_t as a pointer, with NULL for empty,
which assumes pthread_t is scalar and never 0.
getnameinfo threads now run within rb_thread_prevent_fork and register
as they exit, as getaddrinfo threads do, and where getnameinfo runs
without a helper thread it is called within rb_thread_prevent_fork too.
So fork also waits for a reverse lookup in progress, as it already did
for a forward one. raddrinfo_pthread_create now always creates joinable
threads, which drops its pthread_detach fallback for platforms without
pthread_attr_setdetachstate.
The slot is kept across fork, so every fork path that keeps running
Ruby code has to take the fork lock. On the BSDs, Process.daemon forks
with daemon(3) and did not take it, so the daemon would inherit the
registered thread, and its next fork would abort in pthread_join with
ESRCH. Take and release the fork lock around daemon(3) as rb_fork_ruby
does. daemon(3) can fail in the child as well as in the parent, so
compare pids to tell which process returned.
[Bug #22406]
(cherry picked from commit 44f7c6b00d)
[PATCH] win32: Use GetCurrentThreadStackLimits to set machine stack bounds [Bug #11438]
VirtualQuery against a local variable address may return a region that
does not span the whole thread stack when the interpreter is
initialized deep in the stack, such as Ruby embedded in another
application. stack_check() then misfires with a bogus SystemStackError.
[Feature #20590]
For better of for worse, fork(2) remain the primary provider of
parallelism in Ruby programs. Even though it's frowned uppon in
many circles, and a lot of literature will simply state that only
async-signal safe APIs are safe to use after `fork()`, in practice
most APIs work well as long as you are careful about not forking
while another thread is holding a pthread mutex.
One of the APIs that is known cause fork safety issues is `getaddrinfo`.
If you fork while another thread is inside `getaddrinfo`, a mutex
may be left locked in the child, with no way to unlock it.
I think we could reduce the impact of these problem by preventing
in for the most notorious and common cases, by locking around
`fork(2)` and known unsafe APIs with a read-write lock.
Where a local variable is used as part of the stack bounds detection, it
has to actually be on the stack. ASAN can put local variable on "fake
stacks", however, with addresses in different memory mappings. This
completely destroys the stack bounds calculation, and can lead to e.g.
things not getting GC marked on the machine stack or stackoverflow
checks that always fail.
The __asan_addr_is_in_fake_stack helper can be used to get the _real_
stack address of such variables, and thus perform the stack size
calculation properly
[Bug #20001]
This commit changes how stack extents are calculated for both the main
thread and other threads. Ruby uses the address of a local variable as
part of the calculation for machine stack extents:
* pthreads uses it as a lower-bound on the start of the stack, because
glibc (and maybe other libcs) can store its own data on the stack
before calling into user code on thread creation.
* win32 uses it as an argument to VirtualQuery, which gets the extent of
the memory mapping which contains the variable
However, the local being used for this is actually too low (too close to
the leaf function call) in both the main thread case and the new thread
case.
In the main thread case, we have the `INIT_STACK` macro, which is used
for pthreads to set the `native_main_thread->stack_start` value. This
value is correctly captured at the very top level of the program (in
main.c). However, this is _not_ what's used to set the execution context
machine stack (`th->ec->machine_stack.stack_start`); that gets set as
part of a call to `ruby_thread_init_stack` in `Init_BareVM`, using the
address of a local variable allocated _inside_ `Init_BareVM`. This is
too low; we need to use a local allocated closer to the top of the
program.
In the new thread case, the lolcal is allocated inside
`native_thread_init_stack`, which is, again, too low.
In both cases, this means that we might have VALUEs lying outside the
bounds of `th->ec->machine.stack_{start,end}`, which won't be marked
correctly by the GC machinery.
To fix this,
* In the main thread case: We already have `INIT_STACK` at the right
level, so just pass that local var to `ruby_thread_init_stack`.
* In the new thread case: Allocate the local one level above the call to
`native_thread_init_stack` in `call_thread_start_func2`.
[Bug #20001]
fix
Where a local variable is used as part of the stack bounds detection, it
has to actually be on the stack. ASAN can put local variable on "fake
stacks", however, with addresses in different memory mappings. This
completely destroys the stack bounds calculation, and can lead to e.g.
things not getting GC marked on the machine stack or stackoverflow
checks that always fail.
The __asan_addr_is_in_fake_stack helper can be used to get the _real_
stack address of such variables, and thus perform the stack size
calculation properly
[Bug #20001]
The implementation of `native_thread_init_stack` for the various
threading models can use the address of a local variable as part of the
calculation of the machine stack extents:
* pthreads uses it as a lower-bound on the start of the stack, because
glibc (and maybe other libcs) can store its own data on the stack
before calling into user code on thread creation.
* win32 uses it as an argument to VirtualQuery, which gets the extent of
the memory mapping which contains the variable
However, the local being used for this is actually allocated _inside_
the `native_thread_init_stack` frame; that means the caller might
allocate a VALUE on the stack that actually lies outside the bounds
stored in machine.stack_{start,end}.
A local variable from one level above the topmost frame that stores
VALUEs on the stack must be drilled down into the call to
`native_thread_init_stack` to be used in the calculation. This probably
doesn't _really_ matter for the win32 case (they'll be in the same
memory mapping so VirtualQuery should return the same thing), but
definitely could matter for the pthreads case.
[Bug #20001]
With M:N thread scheduler, the native thread (NT) related resources
should be freed when the NT is no longer needed. So the calling
`native_thread_destroy()` at the end of `is will be freed when
`thread_cleanup_func()` (at the end of Ruby thread) is not correct
timing. Call it when the corresponding Ruby thread is collected.
This patch introduce M:N thread scheduler for Ractor system.
In general, M:N thread scheduler employs N native threads (OS threads)
to manage M user-level threads (Ruby threads in this case).
On the Ruby interpreter, 1 native thread is provided for 1 Ractor
and all Ruby threads are managed by the native thread.
From Ruby 1.9, the interpreter uses 1:1 thread scheduler which means
1 Ruby thread has 1 native thread. M:N scheduler change this strategy.
Because of compatibility issue (and stableness issue of the implementation)
main Ractor doesn't use M:N scheduler on default. On the other words,
threads on the main Ractor will be managed with 1:1 thread scheduler.
There are additional settings by environment variables:
`RUBY_MN_THREADS=1` enables M:N thread scheduler on the main ractor.
Note that non-main ractors use the M:N scheduler without this
configuration. With this configuration, single ractor applications
run threads on M:1 thread scheduler (green threads, user-level threads).
`RUBY_MAX_CPU=n` specifies maximum number of native threads for
M:N scheduler (default: 8).
This patch will be reverted soon if non-easy issues are found.
[Bug #19842]
* Revert "Remove special handling of `SIGCHLD`. (#7482)"
This reverts commit 44a0711eab.
* Revert "Remove prototypes for functions that are no longer used. (#7497)"
This reverts commit 4dce12bead.
* Revert "Remove SIGCHLD `waidpid`. (#7476)"
This reverts commit 1658e7d966.
* Fix change to rjit variable name.
```
1) Failure:
TestThreadInstrumentation#test_thread_instrumentation [/tmp/ruby/src/trunk-repeat20-asserts/test/-ext-/thread/test_instrumentation_api.rb:33]:
Call counters[4]: [3, 4, 4, 4, 0].
Expected 0 to be > 0.
```
We fire the EXIT hook after the call to `thread_sched_to_dead` which
mean another thread might be running before the `EXIT` hook have been
executed.
GCC warns of empty format strings, perhaps because they have no
effects in printf() and there are better ways than sprintf().
However, ruby_debug_log() adds informations other than the format,
this warning is not the case.
[Feature #18339]
After experimenting with the initial version of the API I figured there is a need
for an exit event to cleanup instrumentation data. e.g. if you record data in a
{thread_id -> data} table, you need to free associated data when a thread goes away.
Ref: https://bugs.ruby-lang.org/issues/18339
Design:
- This tries to minimize the overhead when no hook is registered.
It should only incur an extra unsynchronized boolean check.
- The hook list is protected with a read-write lock as to cause
contention when some hooks are registered.
- The hooks MUST be thread safe, and MUST NOT call into Ruby as they
are executed outside the GVL.
- It's simply a noop on Windows.
API:
```
rb_internal_thread_event_hook_t * rb_internal_thread_add_event_hook(rb_internal_thread_event_callback callback, rb_event_flag_t internal_event, void *user_data);
bool rb_internal_thread_remove_event_hook(rb_internal_thread_event_hook_t * hook);
```
You can subscribe to 3 events:
- READY: called right before attempting to acquire the GVL
- RESUMED: called right after successfully acquiring the GVL
- SUSPENDED: called right after releasing the GVL.
The hooks MUST be threadsafe, as they are executed outside of the GVL, they also MUST NOT call any Ruby API.
`rb_thread_t` contained `native_thread_data_t` to represent
thread implementation dependent data. This patch separates
them and rename it `rb_native_thread` and point it from
`rb_thraed_t`.
Now, 1 Ruby thread (`rb_thread_t`) has 1 native thread (`rb_native_thread`).
Now GVL is not process *Global* so this patch try to use
another words.
* `rb_global_vm_lock_t` -> `struct rb_thread_sched`
* `gvl->owner` -> `sched->running`
* `gvl->waitq` -> `sched->readyq`
* `rb_gvl_init` -> `rb_thread_sched_init`
* `gvl_destroy` -> `rb_thread_sched_destroy`
* `gvl_acquire` -> `thread_sched_to_running` # waiting -> ready -> running
* `gvl_release` -> `thread_sched_to_waiting` # running -> waiting
* `gvl_yield` -> `thread_sched_yield`
* `GVL_UNLOCK_BEGIN` -> `THREAD_BLOCKING_BEGIN`
* `GVL_UNLOCK_END` -> `THREAD_BLOCKING_END`
* removed
* `rb_ractor_gvl`
* `rb_vm_gvl_destroy` (not used)
There are GVL functions such as `rb_thread_call_without_gvl()` yet
but I don't have good name to replace them. Maybe GVL stands for
"Greate Valuable Lock" or something like that.
To make some kind of Ractor related extensions, some functions
should be exposed.
* include/ruby/thread_native.h
* rb_native_mutex_*
* rb_native_cond_*
* include/ruby/ractor.h
* RB_OBJ_SHAREABLE_P(obj)
* rb_ractor_shareable_p(obj)
* rb_ractor_std*()
* rb_cRactor
and rm ractor_pub.h
and rename srcdir/ractor.h to srcdir/ractor_core.h
(to avoid conflict with include/ruby/ractor.h)
The timer function used on windows system set timer interrupt
flag of current main ractor's executing ec and thread can detect
the end of time slice. However, to set all ec->interrupt_flag for
all running ractors, it is requires to synchronize with other ractors.
However, timer thread can not acquire the ractor-wide lock because
of some limitation.
To solve this issue, this patch introduces USE_VM_CLOCK compile option
to introduce rb_vm_t::clock. This clock will be incremented by the
timer thread and each thread can check the incrementing by comparison
with previous checked clock. At last, on windows platform this patch
introduces some overhead, but I think there is no critical performance
issue because of this modification.
This commit introduces Ractor mechanism to run Ruby program in
parallel. See doc/ractor.md for more details about Ractor.
See ticket [Feature #17100] to see the implementation details
and discussions.
[Feature #17100]
This commit does not complete the implementation. You can find
many bugs on using Ractor. Also the specification will be changed
so that this feature is experimental. You will see a warning when
you make the first Ractor with `Ractor.new`.
I hope this feature can help programmers from thread-safety issues.
We need another native thread to call some unblocking functions
which aren't RUBY_UBF_IO or RUBY_UBF_PROCESS. Instead of a
permanent thread in <= 2.5, we can now rely on the thread cache
feature to perform interrupts.
[ruby-core:90865] [Bug #15499]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66708 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.ac: introduce new configure option `--enable-mjit` and
`--disable-mjit`. Default is "enable".
`--disable-mjit` disables all of MJIT features so that `ruby --jit`
can't enable MJIT.
This option affect a macro `USE_MJIT`.
This change remove `--enable/disable-install-mjit-header` option.
* Makefile.in: introduce the `ENABLE_MJIT` variable.
* common.mk: use `ENABLE_MJIT` option.
* internal.h: respect `USE_MJIT`. Same as other *.c, *.h.
* test/ruby/test_jit.rb: check `ENABLE_MJIT` key of rbconfg.rb.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65204 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_hrtime_t is a more pleasant type to use and this can make
future changes around sleeping/scheduling easier.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65182 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Douglas Eichelberger